The battery pack fits into your Transmitter or Signal Generator battery compartment.

  1. Remove the accessory tray from the base of your Transmitter or Signal Generator by releasing the clips on either side of the unit.
  2. Remove the existing battery compartment cover and any batteries in the unit.
  3. You may want to permanently detach the battery cover from the unit using a screw driver. If you do detach the old cover take care to put the screw back in the base of the unit and to keep the old cover secure in the accessory tray so you can use alkaline batteries if you need to.
  4. Insert the battery pack into the base of the unit and secure it using the thumb screws on the battery pack.
  5. Place the unit back on top of the accessory tray and snap the clips on either side of the unit closed.