Please review the latest product information, health and safety information and instructions available at csmetaldetectors.com before using your device. You can also find a link to the limited warranty, regulatory information about your EVO6000 and additional support resources there.

Electric Shock and Heat: Do not expose your EVO6000, the charger or headphones to water or extreme conditions. Take care when handling the charger to avoid electric shock. Only use the charger provided to charge your EVO6000.

Pacemakers and Other Implanted Devices: The EVO6000 contains magnets and components that emit an electromagnetic field and could interfere with pacemakers or other electronic medical devices. Before using your EVO6000, consult your physician or medical device manufacturer about the required minimum safe distance between your EVO6000 and your medical device.

Device with Magnet: Avoid placing any media that contains magnets or is sensitive to magnetism, such as credit cards, bank cards, audio/video, tapes, or magnetic memory devices, near this product. Media containing information sensitive to magnets should be kept at least 5 cm (2 inches) away from the product. For example, if you carry your wallet or billfold containing magnetic cards next to this product, information stored on those cards could be destroyed.

Similarly, magnet-sensitive devices, such as a mechanical watch or measuring device, can be damaged if they come too close to this product.

EU Compliance Statement

Hereby, C.Scope International Limited declares that the radio equipment type EVO6000 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at csmetaldetectors.com/doc.

This product emits radio frequency fields. The use of radio frequency emitting metal detectors may be restricted in certain territories. Check with local authorities before use.

Radio Frequency Specification

Detector operating frequency: 17.5 kHz +/- 1.0 kHz

Detector maximum radio frequency power at 1m: 64.5 dBµA/m within +/- 6bB

Bluetooth 2.4 GHz to 2.4835 GHz, -5.9 dBm

Detection Range:

MODE

Target 1 (mm)

Target 2 (mm)

DISC 1; GROUND 50

277

180

DISC 99; GROUND 50

277

180

DISC 1; GROUND TRACKING

277

180

DISC 99; GROUND TRACKING

277

180

Target 1:        50mm x 50mm x 1.0mm Copper

Target 2:        14mm diameter Chromium plated steel ball

Settings:        SENS 90; IRON VOL 99; DISC VOL 99;

Environment:        In air, 1.5m from any ground and 5m from any metal. Very low ambient electromagnetic field.

Operational Note: Extraneous electromagnetic fields may result in false positive indications.

Important: This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions or other electronic devices.

This device may be operated in all member states of the EU, as well as Switzerland, Norway, Iceland, Liechtenstein and Turkey.


The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by  C.Scope International Limited is under license. Other trademarks and trade names are those of their respective owners.

Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.

EVO6000 is a trademark of C.Scope International Limited.

 

European Union – Disposal Information: The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.